Click on image to zoom

Articulator Suspension Package With Bilstein Shocks

2000-2004 Xterra 2WD

SKU: NSPACX2WD4ARTBIL

Arms are made to order and can take up to or more than 2 weeks. In most cases they are made in under that time. However in busier times it can run a little over. We appreciate your patience.

Pricing: $1,290.00

Description
Details
Shipping

Description

This package will provide the best articulation possible in a bolt on kit.

Chromally tubular upper a-arms
- Upper control arms are made longer than stock arms to provide actual lift while maintaining proper ball joint angles
- Keeps CVs well within manufacturer's specifications
- Chromally tubing, long used by the racing industry, is lightweight yet stronger than steel plate
- Designed to give a true 3" of lift and provides additional wheel travel
- Aligns easily into manufacturer's specifications
Greasable upper ball joints
- We use only the best ball joints available, not low quality knock-offs
Polyurethane bushings, sleeves and hardware
Idler arm brace
Zerk fittings
- The zerk fittings help to eliminate annoying squeak from bushings found on other kits
- Increases the life of upper balljoints and bushings
4 Bilstein Heavy Duty Shocks
Heavy duty torsion bars with 30% higher spring rate
Rear 3 leaf add-a-leaf pack
- Full length 3 leaf add-a-leaf pack was designed specifically for your Nissan
- Anti-friction pads to reduce noise and increase longevity
- Includes center pin bolts and leaf pack clamps
- The leaf pack clamps are long enough for the whole leaf pack to keep individual leafs from moving
- Helps revive sagging factory springs
- Provides 3" of lift without impeding wheel travel or articulation
- Increases your load carrying capacity so you don't have to worry about bottoming out when your Nissan is loaded down
- Full length leaf packs distribute the load more evenly along the entire length of the spring
- Diamond cut edges to distribute the load more evenly
- Virtually eliminates axle wrap
- Helps prevent sagging and breakage of stock leaf packs
- 3 leafs per side
- Removing the overload leaf is recommended
Revolver shackles
- For the ultimate in rear axle articulation the revolver shackles replace your stock shackles
- Direct bolt on
- Comes with sleeves, bolts and detailed installation instructions which include required modifications
Comes with complete installation instructions

This lift will allow for 32" tires on stock back spaced wheels
This kit will improve the off-road ride and make on-road ride more controllable
You will have to modify brake line (stock brake line bracket must be modified) when using stock brake lines.
Longer brake lines are sold separately and not required with this lift.
New wheels with negative 3.75" backspacing recommended with this lift
Extensively tested for safety on and off road
Removing overload leaf is recommened.
If you choose to leave the overload leaf in, you will need new U-bolts.
Shackles are made to order and can take up to a week. In most cases they are made in under that time. However in busier times it can run a little over. We appreciate your patience.