Deluxe Suspension Pkg W/3 Leaf Add A Leaf Pack & RS9000XL Shocks
1998-2004 Frontier, 4WD, Regular or King Cab with Diesel Engine
SPAC3LEAFRS9XFRTDIS
Availability: Arms are made to order and can take up to or more than 2 weeks. In most cases they are made in under that time. However in busie
Pricing:
$1,180.00
Description
- Complete Package provides a true 3" of lift
- Package includes:
- Chromoly tubular upper a-arms
- Upper control arms are made longer than stock arms to provide actual lift while maintaining proper ball joint angles
- Keeps CVs well within manufacturer's specifications
- Chromoly tubing, long used by the racing industry, is lightweight yet stronger than steel plate
- Designed to give a true 3" of lift and provides additional wheel travel
- Aligns easily into manufacturer's specifications
- Greasable upper ball joints
- We use only the best ball joints available, not low quality knock-offs
- Chromoly tubular upper a-arms
- Polyurethane bushings, sleeves and hardware
- Idler arm brace
- Zerk fittings
- The zerk fittings help to eliminate annoying squeak from bushings found on other kits
- Increases the life of upper ball joints and bushings
- 4 Rancho RS9000XL Shocks
- Heavy duty torsion bars with 30% higher spring rate
- Rear 3 leaf add-a-leaf pack
- Full length 3 leaf add-a-leaf pack was designed specifically for your Nissan
- Anti-friction pads to reduce noise and increase longevity
- Includes center pin bolts and leaf pack clamps
- The leaf pack clamps are long enough for the whole leaf pack to keep individual leafs from moving
- Helps revive sagging factory springs
- Provides 3" of lift without impeding wheel travel or articulation
- Increases your load carrying capacity so you don't have to worry about bottoming out when your Nissan is loaded down
- Full length leaf packs distribute the load more evenly along the entire length of the spring
- Diamond cut edges to distribute the load more evenly
- Virtually eliminates axle wrap
- Helps prevent sagging and breakage of stock leaf packs
- 3 leafs per side Removing the overload leaf is recommended
- Comes with complete installation instructions
- This lift will allow for 32" tires on stock back spaced wheels
- This kit will improve the off-road ride and make on-road ride more controllable
- You will have to modify brake line (stock brake line bracket must be modified) when using stock brake lines.
- Longer brake lines are sold separately and not required with this lift.
- New wheels with negative 3.75" backspacing recommended with this lift Extensively tested for safety on and off road
- Removing overload leaf is recommended. If you choose to leave the overload leaf in, you WILL need new U-bolts.
Details
- SPAC3LEAFRS9XFRTDIS
- SPAC3LEAFRS9XFRTDIS
- Arms are made to order and can take up to or more than 2 weeks. In most cases they are made in under that time. However in busie
- New
Shipping Information
- Item Requires Shipping
- 140.0 lbs.