Suspension Package With 3 Leaf Add A Leaf & Bilstein Shocks
1986.5-1997 Hardbody 4WD
NSPACHB4BILS3PK
Availability: Arms are made to order and can take up to or more than 2 weeks. In most cases they are made in under that
time.
Pricing:
$825.00
Description
- This package provides a full 3" of lift
- Package Includes:
- Chromolly tubular upper control arms
- These control arms are made longer than stock to provide actual lift while maintaining proper ball joint angels
- Control arms keep the CV's well within manufacturer's specifications
- Chromally tubing, long used by the racing industry, is lightweight yet stronger than steel plate
- Designed to give a true 3" of lift and provide additional wheel travel
- Aligns easily into manufacturer's specifications
- Work with factory ball joints
- 3 Leaf Add-A-Leaf Pack
- The full length 3 leaf add-a-leaf pack was designed specifically for your Nissan
- Anti-friction pads to reduce noise and increase longevity
- Comes with center pin bolt and leaf pack clamps
- The leaf pack clamps are long enough for the whole leaf pack to keep individual leafs from moving
- Helps revive sagging factory springs
- Provides 3" of lift without impeding wheel travel or articulation
- Also increases your load carrying capacity so you don't have to worry about bottoming out when your Nissan is loaded down
- Full length leaf packs distribute the load more evenly, along the entire length of the spring
- Diamond cut edges
- Virtually eliminates axle wrap
- These 3-leaf add-a-leaf packs help prevent sag and breakage of stock leaf packs
- Removing overload leaf is recommened
- Front and Rear Bilstein Heavy Duty Shocks
- Heavy Duty Torsion Bars with 30% higher spring rate
- Idler Arm Brace
- Installation Hardware
- Complete Installation Instructions
- New wheels with negative 3.75" backspacing recommended
- Extensively tested for safety on and off road
- If you choose to leave the overload leaf in, you WILL need new U-bolts which are sold separately---Longer U-Bolts
Details
- NSPACHB4BILS3PK
- NSPACHB4BILS3PK
- Arms are made to order and can take up to or more than 2 weeks. In most cases they are made in under that time.
- New
Categories
Shipping Information
- Item Requires Shipping
- 135.0 lbs.
